Install and activate your
eSIM on Android
Go to Settings, then tap Network & Internet and select Mobile Network to begin installation.
Select "Install with QR Code" if you have the code on another device to scan.
eSIM Manual code
1234 5678 9012
Tap "Install Manually" if you can't scan the QR code.
Select your installation option
Before starting QR code installation, note these key points:
- •You’ll need the QR code open on another screen or device to scan.
- •Ensure stable internet connection during the process.
- •Note: QR code can be scanned once only.
- •Do not remove the eSIM—you won’t be able to reuse it.
Before starting manual installation, note these key points:
- •Manual installation codes can only be used once.
- •Ensure stable internet connection during the process.
- •Do not remove the eSIM—you won’t be able to reuse it.
Enter Activation Code
1234 5678 9012
Let's get started together
Our team is here 24/7 if you need assistance during installation.
Install eSIM via QR Code
Install eSIM via Activation Code
Settings
This phone is ready to activate a Hello Roam eSIM.
1. Settings
Go to your phone settings and then to 'Connections'. Verify that you have a stable internet connection (Wi-Fi or mobile data).
Connections
2. SIM card Manager
Navigate to the SIM card manager in your phone settings to manage your eSIM profiles.
Sim manager
Sim cards
eSIMs
Preferred SIMs
3. Add your eSIM
Select the option to add a new eSIM to your device. You can scan a QR code or enter the details manually.
Add eSIM
Other ways to add SIMs
4. Installation Options
Choose your preferred installation method - either by scanning a QR code or entering the activation details manually.
Scan the QR code you get from your service provider
5. Scan the QR code
Use your phone camera to scan the QR code provided in your email to automatically configure your eSIM.
Add eSIM
Add Hello Roam eSIM?
This will let your phone connect to hello roam network.
6. Add mobile plan
Confirm the mobile plan details and tap 'Add mobile plan' to complete the eSIM installation.
Sim manager
Sim cards
eSIMs
Preferred SIMs
7. Label and setup eSIM
Give your eSIM a label (e.g., 'Hello Roam') and configure it as your preferred mobile data line.
Install eSIM via QR Code
Install eSIM via Activation Code
Settings
This phone is ready to activate a Hello Roam eSIM.
1. Settings
Go to your phone settings and then to 'Connections'. Verify that you have a stable internet connection (Wi-Fi or mobile data).
Connections
2. SIM card Manager
Navigate to the SIM card manager in your phone settings to manage your eSIM profiles.
Sim manager
Sim cards
eSIMs
Preferred SIMs
3. Add your eSIM
Select the option to add a new eSIM to your device. You can scan a QR code or enter the details manually.
Add eSIM
Other ways to add SIMs
4. Installation Options
Choose your preferred installation method - either by scanning a QR code or entering the activation details manually.
Add using activation code
The code looks like this:
• https://operator.sm-dp.com
• LPA:1 $operator.com$ABCDE-12345
5. Enter the code
Copy and paste the manual installation code for Android sent to your email. Click "Continue" and wait a few seconds.
Add eSIM
Add Hello Roam eSIM?
This will let your phone connect to hello roam network.
6. Add mobile plan
Confirm the mobile plan details and tap 'Add mobile plan' to complete the eSIM installation.
Sim manager
Sim cards
eSIMs
Preferred SIMs
7. Label and setup eSIM
Give your eSIM a label (e.g., 'Hello Roam') and configure it as your preferred mobile data line.
Activation guide for your eSIM
Important:
- •You must be at your destination to activate your eSIM.
- •Enable airplane mode, then turn on Wi-Fi to avoid home network charges.
- •Download this guide as PDF for offline access during your trip.
Open Settings and navigate to Mobile Data to find your eSIM.
Turn on your eSIM line and enable data roaming for connectivity.
Your eSIM is now active and ready to use worldwide.
That's it! Your plan is now active and you can start using your data.
Start using your data immediately. No roaming fees, no surprises.
1.
Make sure there is at least one bar in the signal icon on your Android device.
2.
Go to "Settings" > "Network & Internet" > "SIMs", tap "Hello Roam" and verify that "Roaming" is enabled.
FAQs
Most modern Android phones with Android 9.0 (Pie) or later support eSIM technology. Compatible models include Samsung Galaxy S20/S21/S22/S23/S24 and newer, Google Pixel 3/4/5/6/7/8 series and Pixel Fold, OnePlus 9/10/11/12 series, Xiaomi 12T Pro and 13 series, Oppo Find X3/X5 Pro, Motorola Razr 2019/2020/40/40 Ultra, and Nokia XR21.
The location varies by manufacturer's Android skin: Samsung (One UI): Settings > Connections > SIM Manager > Add eSIM. Google Pixel (Stock Android): Settings > Network & Internet > SIMs > Add more. OnePlus (OxygenOS): Settings > Mobile Network > SIM Card Manager. Xiaomi (MIUI): Settings > SIM cards & mobile networks.
Yes! You can install eSIM manually on Android without scanning a QR code. Navigate to your phone's eSIM settings (location varies by manufacturer), select 'Add eSIM' or 'Add mobile plan', choose 'Enter activation code manually' or 'Use SIM card instead', then input the SM-DP+ address and activation code from your HelloRoam email confirmation.
If you don't see eSIM options on your Android phone, verify these 5 requirements: (1) Your phone model supports eSIM, (2) Android version is 9.0 (Pie) or newer, (3) Your phone is carrier-unlocked, (4) You have the correct regional variant, (5) Software is up to date.
Yes! Most eSIM-compatible Android phones support Dual SIM Dual Standby (DSDS) with one physical nano-SIM and one eSIM active simultaneously. You can independently select which SIM handles mobile data, calls, and SMS messages through your phone's SIM settings.
